ISO 9001ISO 14001IATF 16949ULREACH

Application

Magnet wire for motor windings

Motor windings are where copper-clad aluminium earns its place. The copper skin carries current and solderability, the aluminium core removes weight and cost, and the enamel system has to survive continuous thermal cycling. We draw and enamel the conductor ourselves, so copper ratio, diameter and enamel build are controlled together instead of being bought in from three suppliers.

Motor winding wire

Why this wire

What the application actually needs.

  • Weight down 30–40 %CCA conductor at 10–20 % copper volume cuts winding mass versus solid copper — useful in EV traction motors, drones and hand-held tools.
  • Class 130–200 insulationPolyester, polyester-imide and polyamide-imide builds to IEC 60317 and NEMA MW, with UL-listed constructions.
  • Round, flat and self-bondingRound wire for random winding, flat wire for high slot fill, self-bonding grades for coils that must hold shape without varnish.
  • Weldable and solderableThe copper cladding supports crimping, welding and soldering on the same terminals your line already uses.

Typical specification

Typical conductorCCA 10 / 15 / 20 % Cu · ETP copper · 1350 aluminium
Round diameter0.10 – 4.00 mm (CCA from 0.05 mm)
Flat sizeThickness 0.20 – 3.00 mm · Width 1.00 – 12.00 mm
Temperature class130 / 155 / 180 / 200 °C
Enamel typesPEW (QZ), UEW (QA), EIW (QZY), EI/AIW (QZY/XY)
Test standardIEC 60317, NEMA MW 1000, GB/T 6109

Typical values. Final specification is confirmed on the quotation and the CoA.

Questions

Common questions from engineers.

Can enameled CCA replace copper in a motor winding?

In motors where winding space allows a slightly larger conductor, yes. CCA is about 40 % lighter than copper at the same diameter and roughly 60 % as conductive, so designers usually increase the cross-section by one or two AWG steps. We supply both the CCA and the equivalent copper build so the two can be compared on the same test bench.

Do you supply flat wire for hairpin or concentrated windings?

Yes. Flat enameled CCA and flat enameled copper are produced in-house from 0.20 mm thickness, with width and edge radius to drawing.

Enquiry

Motor winding quotation.

Include the conductor, diameter or flat size, temperature class, quantity and destination port.

We reply within one working day. Your details stay with our sales team — no newsletters.