PriceList for Annealed Bare Copper Wire - Micro Coaxial Cable Inner Conductor Copper Clad Aluminum Magnesium Wire Used for High-Frequency Signal Transmission – Shenzhou Detail:
Product Detail
To achieve better tensile strength, using aluminum magnesium alloy rod as the core wire, then cladding copper layer on the surface, after drawing several times, then copper clad aluminum magnesium wire is made.
Advantages: Same as CCA Wire, it has low density, easy to solder and high strength.
Disadvantages: As the conductor contains magnesium, the resistivity compared with pure CCA wire is higher. It is not conductive to make conductor for transporting current.
Product Parameter
|
Product name |
CCAM WIRE |
|
Diameters available [mm] Min – Max |
0.05mm-2.00mm |
|
Density [g/cm³] Nom |
2.95-4.00 |
|
Conductivity [S/m * 106] |
31-36 |
|
IACS [%] Nom |
58-65 |
|
Temperature-Coefficient [10-6/K] Min – Max |
3700 – 4200 |
|
Elongation (1)[%] Nom |
17 |
|
Tensile strength (1)[N/mm²] Nom |
170 |
|
Outer metal by volume[%] Nom |
3-22% |
|
Outer metal by weight[%] Nom |
10-52 |
|
Weldability/Solderability[--] |
++/++ |
|
Properties |
CCAM combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to CCA, good weldability and solderability, recommended for very fine sizes down to 0.05mm |
|
Application |
CATV coaxial cable, large capacity communication network signal electric LAN, control signal cable, cable shielding line, metal hose etc. Aspects. |
IEC 60317(GB/T6109)
The Tech & Specification parameters of our company’s wires are in international unit system, with the unit of millimeter (mm). If use American Wire Gauge (AWG) and British Standard Wire Gauge (SWG) , the following table is a comparison table for your reference.
The most special dimension can be customized as per the requirements of customers.
Comparison of Different Metal Conductors’s Tech& Specification
|
METAL |
Copper |
Aluminium Al 99.5 |
CCA10% |
CCA15% |
CCA20% |
CCAM |
TINNED WIRE |
|
Diameters available |
0.04mm -2.50mm |
0.10mm -5.50mm |
0.10mm -5.50mm |
0.10mm -5.50mm |
0.10mm -5.50mm |
0.05mm-2.00mm |
0.04mm -2.50mm |
|
Density [g/cm³] Nom |
8.93 |
2.70 |
3.30 |
3.63 |
3.96 |
2.95-4.00 |
8.93 |
|
Conductivity[S/m * 106] |
58.5 |
35.85 |
36.46 |
37.37 |
39.64 |
31-36 |
58.5 |
|
IACS[%] Nom |
100 |
62 |
62 |
65 |
69 |
58-65 |
100 |
|
Temperature-Coefficient[10-6/K] Min – Max |
3800 – 4100 |
3800 – 4200 |
3700 – 4200 |
3700 – 4100 |
3700 – 4100 |
3700 – 4200 |
3800 – 4100 |
|
Elongation (1)[%] Nom |
25 |
16 |
14 |
16 |
18 |
17 |
20 |
|
Tensile strength (1)[N/mm²] Nom |
260 |
120 |
140 |
150 |
160 |
170 |
270 |
|
Outer metal by volume[%] Nom |
- |
- |
8-12 |
13-17 |
18-22 |
3-22% |
- |
|
Outer metal by weight[%] Nom |
- |
- |
28-32 |
36-40 |
47-52 |
10-52 |
- |
|
Weldability/Solderability[--] |
++/++ |
+/– |
++/++ |
++/++ |
++/++ |
++/++ |
+++/+++ |
|
Properties |
Very high conductivity, good tensile strength, high elongation, excellent windability, good weldability and solderability |
Very low density allows high weight reduction, fast heat dissipation, low conductivity |
CCA combines the advantages of Aluminum and Copper. Low density allows weight reduction, elevated conductivity and tensile strength compared to Aluminum, good weldability and solderability, recommended for diameter 0.10mm and above |
CCA combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to Aluminum, good weldability and solderability, recommended for very fine sizes down to 0.10mm |
CCA combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to Aluminum, good weldability and solderability, recommended for very fine sizes down to 0.10mm |
CCAM combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to CCA, good weldability and solderability, recommended for very fine sizes down to 0.05mm |
Very high conductivity, good tensile strength, high elongation, excellent windability, good weldability and solderability |
|
Application |
General coil winding for electrical application, HF litz wire. For use in industrial, automotive, appliance, consumer electronics |
Different electrical application with low weight requirement, HF litz wire. For use in industrial, automotive, appliance, consumer electronics |
Loudspeaker, headphone and earphone, HDD, induction heating with the need of good termination |
Loudspeaker, headphone and earphone, HDD, induction heating with the need of good termination, HF litz wire |
Loudspeaker, headphone and earphone, HDD, induction heating with the need of good termination, HF litz wire |
Electrical wire and cable, HF litz wire |
Electrical wire and cable, HF litz wire |
Product detail pictures:
Related Product Guide:
We are going to dedicate ourselves to providing our esteemed buyers together with the most enthusiastically thoughtful products and services for PriceList for Annealed Bare Copper Wire - Micro Coaxial Cable Inner Conductor Copper Clad Aluminum Magnesium Wire Used for High-Frequency Signal Transmission – Shenzhou , The product will supply to all over the world, such as: Bangkok, Netherlands, Benin, Our mission is "Provide Products with Reliable Quality and Reasonable Prices". We welcome customers from every corner of the world to contact us for future business relationships and achieving mutual success!
By Klemen Hrovat from France - 2018.09.23 17:37
Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
By Lee from Kazakhstan - 2018.12.11 11:26
Products categories
-
Short Lead Time for Single Twisted Pair Cable -...
-
Excellent quality Ei/Aiw200/220 40%Cu Enameled ...
-
Online Exporter 2 Pair Twisted Shielded Cable -...
-
Hot Selling for Running Wire Through Walls - H...
-
Discountable price Multi Strand Wire - High qu...
-
Reliable Supplier Twisted Pair Cable Utp And St...